monitoruf.blogg.se

All other brand, product, service and feature names or trademarks are the property of their respective owners. CFX is a trademark of Sony Corporation in Japan.

ICEM CFD is a trademark used by ANSYS, Inc. or its subsidiaries in the United States or other countries. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. ANSYS, ANSYS Workbench, Ansoft, AUTODYN, EKM, Engineering Knowledge Manager, CFX, FLUENT, HFSS and any and all ANSYS, Inc. Unauthorized use, distribution or duplication is prohibited. is certified to ISO 9001:2008.Ģ Copyright and Trademark Information 2013 SAS IP, Inc. Southpointe 275 Technology Drive Canonsburg, PA (T) (F) Release 15.0 November 2013 ANSYS, Inc. Various approaches such as splitting the volumes and adding the parts step by step to avoid the error failed, since I have limited possibilities of changing the geometry itself.1 ANSYS Mechanical APDL Modeling and Meshing Guide ANSYS, Inc. As a result the error message is changing ("Try loosening the tolerance.", "The following entities do not support boolean operation."), or the calculation time is skyrocketing. I then tried different point coincidence tolerances by using the BTOL command and using different factors (10x, 50x, 100x, etc) on the value given in the error message above. Model size (current problem) 2.081640e+01, current BTOL setting 1.0e-05, minimum keypoint distance 4.354838e-03."

"Boolean operation failed: Adjust the tolerance value on the BTOL command to some fraction of the minimum keypoint distance. However I´m receiving the following error message: For creating a geometry in ANSYS CLASSIC, with which I don´t have a lot of experience, it is inevitable that I add two volumes using the boolean operation.